- A smaller big machine: allows molds of up to 270 mm wide with a maximum opening of 470 mm between plates. A machine for manufacturing pieces up to 32 grams in PS (DEU 250H55) with very rapid cycles and small energy consumption. Vacuum cycle according to Euromap 6, of 1.50 seconds for 170 mm.

 

 

Ingenious mold holders that allow injection with conventional molds or only exchanging the part's figures. Savings in mold cost and their assembly and disassembly time.

 

 

Machine with spacious inner spaces that permits easy assembly and handling of molds, but with small external dimensions.

 

 

A modern control, the Deu 4000, derived from the well known Deu 6000. It allows for all functions existing in the injectors with the greatest clamping force. This new control has the same work guidelines as the 6000. However, it has an on-screen keyboard in a different format, in accordance with the injector's new design.

 

 

The new Deu 250H55 is essential for companies that manufacture small parts and conventional or technical materials. It yields high production at a lower cost.

 

 

Calculations made on real tests yield considerable improvements in the cost of injected pieces (as opposed to conventional ones). This is thanks to the very low price of the injector and mold, the reduction of the material used in pasting, channels and changing material, the very low electric energy consumption and an absolute repeatability of the process.

 

Due to its characteristics, the Deu 250H55 may also be applied at:

- Universities (Laboratories for new materials).

- Teaching: Public or private FP schools (professional training of injectors and mold technicians).

- Prototypes (low cost molds with a short manufacturing time).

- First series (pieces to verify their acceptance on the market).

- Nursery of young businesses (low investment cost in machines and molds)