| | 4500H2955c | 4500H3320 |
I
N
J
E
C
T
I
O
N
G. | Spindle type | - | A“std” | B | C | A“std” | B | C |
| Nominal spindle diameter | mm | 70 | 75 | 80 | 75 | 80 | 85 |
| Injection pressure according to spindles | bar | 1920 | 1672 | 1470 | 1747 | 1535 | 1360 |
| Injection theoretical volume mat.PS | cm3 | 1539 | 1767 | 2010 | 1899 | 2161 | 2440 |
| Injection theoretical weight, mat. PS | g | 1385 | 1590 | 1809 | 1709 | 1944 | 2196 |
| Injection speed | cm3/s | 315 | 362 | 412 | 441 | 502 | 567 |
| Plasticization capacity, material PS | g/s | 52,77 | 61,11 | 69,44 | 61,11 | 69,44 | 77,77 |
| Spindle length-diameter ratio | L/D | 22 | - | - | 20,5 | - | - |
| Number of spindle turns | rpm | 175 | 145 |
| Number of resistances (nozzle+plasticization) | - | 1 + 4 | 1 + 4 |
| Total heating power | kW | 24,74 | 26,54 |
C
L
A
M
P
I
N
G
G
R
O
U
P
| Maximum clamping force | kN | 4500 |
| Maximum opening between plates | mm | 1620 |
| Maximum mold opening | mm | 770 |
| Mold thickness (minimum/maximum) | mm | 300 / 850 |
| Space between bars (Horizontal) | mm | 760 |
| Plate measurements (Width x Height) | mm | 1130 x 1130 |
| Nº of ejector points | - | 17 |
| Ejector force | kN | 172 |
| Ejector course | mm | 240 |
| Hydraulic pump power | kW (HP) | 55 (75) |
| Oil tank volume | lts | 700 |
| Approximate weight of machine without oil | kg | 21000 |
| Approx. machine measurements(LxAnxAl) | mm | 8300 x 1840 x 2100 |
expanded technical document