| | 5000H3320 | 5000H4190 |
I
N
J
E
C
T
I
O
N
G. | Spindle type | - | A“std” | B | C | A“std” | B | C |
| Nominal spindle diameter | mm | 75 | 80 | 85 | 80 | 85 | 90 |
| Injection pressure according to spindles | bar | 1747 | 1535 | 1360 | 1915 | 1696 | 1513 |
| Injection theoretical volume mat.PS | cm3 | 1899 | 2161 | 2440 | 2186 | 2468 | 2767 |
| Injection theoretical weight, mat. PS | g | 1709 | 1944 | 2196 | 1967 | 2221 | 2490 |
| Injection speed | cm3/s | 441 | 502 | 567 | 392 | 443 | 494 |
| Plasticization capacity, material PS | g/s | 61,11 | 69,44 | 77,77 | 66,66 | 76,38 | 86,11 |
| Spindle length-diameter ratio | L/D | 20,5 | - | - | 20 | - | - |
| Number of spindle turns | rpm | 145 | 145 |
| Number of resistances (nozzle+plasticization) | - | 1 + 4 | 1 + 4 |
| Total heating power | kW | 26,54 | 27,4 |
C
L
A
M
P
I
N
G
G
R
O
U
P
| Maximum clamping force | kN | 5000 |
| Maximum opening between plates | mm | 1760 |
| Maximum mold opening | mm | 810 |
| Mold thickness (minimum/maximum) | mm | 300 / 950 |
| Space between bars (Horizontal) | mm | 810 |
| Plate measurements (Width x Height) | mm | 1210 x 1210 |
| Nº of ejector points | - | 17 |
| Ejector force | kN | 172 |
| Ejector course | mm | 240 |
| Hydraulic pump power | kW (HP) | 55 (75) |
| Oil tank volume | lts | 800 |
| Approximate weight of machine without oil | kg | 23000 |
| Approx. machine measurements(LxAnxAl) | mm | 8500 x 1920 x 2200 |
expanded technical document