- Injects up to 3061 g.
- Clamping force 6500 kN
- Standard model
| | 6500H4190 | 6500H5270 | 6500H5820 |
I
N
J
E
C
T
I
O
N
G. | Spindle type | - | A“std” | B | C | A“std” | B | C | A“std” | B | | Nominal spindle diameter | mm | 80 | 85 | 90 | 85 | 90 | 95 | 90 | 100 | | Injection pressure according to spindles | bar | 1915 | 1696 | 1513 | 1936 | 1726 | 1549 | 1726 | 1398 | | Injection theoretical volume mat.PS | cm3 | 2186 | 2468 | 2767 | 2723 | 3053 | 3402 | 3371 | 4162 | | Injection theoretical weight, mat. PS | g | 1967 | 2221 | 2490 | 2450 | 2747 | 3061 | 3034 | 3746 | | Injection speed | cm3/s | 392 | 443 | 494 | 518 | 581 | 647 | 674 | 832 | | Plasticization capacity, material PS | g/s | 66,66 | 76,38 | 86,11 | 77,77 | 86,11 | 97,22 | 100 | 125 | | Spindle length-diameter ratio | L/D | 20 | - | - | 20,2 | - | - | 21,1 | - | | Number of spindle turns | rpm | 145 | 135 | 156 | | Number of resistances (nozzle+plasticization) | - | 1 + 4 | 1 + 4 | 1 + 5 | | Total heating power | kW | 27,4 | 30,1 | 34,4 | C
L
A
M
P
I
N
G
G
R
O
U
P
| Maximum clamping force | kN | 6500 | | Maximum opening between plates | mm | 1920 | | Maximum mold opening | mm | 920 | | Mold thickness (minimum/maximum) | mm | 350 / 1000 | | Space between bars (Horizontal) | mm | 910 | | Plate measurements (Width x Height) | mm | 1370 x 1370 | | Nº of ejector points | - | 21 | | Ejector force | kN | 300 | | Ejector course | mm | 240 | | Hydraulic pump power | kW (HP) | 75 (100) | | Oil tank volume | lts | 1000 | | Approximate weight of machine without oil | kg | 33700 | | Approx. machine measurements(LxAnxAl) | mm | 9600 x 2180 x 2350 |
|
expanded technical document