| | 250H55 |
I
N
J
E
C
T
I
O
N
G. | Spindle type | - | H | A“std” | B | C |
| Nominal spindle diameter | mm | 18 | 20 | 22 | 24 |
| Injection pressure according to spindles | bar | 2593 | 2100 | 1735 | 1458 |
| Injection theoretical volume mat.PS | cm3 | 20 | 25 | 30 | 36 |
| Injection theoretical weight, mat. PS | g | 18 | 22 | 27 | 32,4 |
| Injection speed | cm3/s | 43 | 53 | 64 | 76 |
| Plasticization capacity, material PS | g/s | 3,61 | 4,44 | 5,83 | 7,22 |
| Spindle length-diameter ratio | L/D | - | 20 | - | - |
| Number of spindle turns | rpm | 335 |
| Number of resistances (nozzle+plasticization) | - | 1 + 3 |
| Total heating power | kW | 3,2 |
C
L
A
M
P
I
N
G
G
R
O
U
P
| Maximum clamping force | kN | 250 |
| Maximum opening between plates | mm | 470 |
| Maximum mold opening | mm | 220 |
| Mold thickness (minimum/maximum) | mm | 100 / 250 |
| Space between bars (Horizontal) | mm | 270 |
| Plate measurements (Width x Height) | mm | 410 x 410 |
| Nº of ejector points | - | 1 |
| Ejector force | kN | 13,4 |
| Ejector course | mm | 60 |
| Hydraulic pump power | kW (HP) | 7,5 (10) |
| Oil tank volume | lts | 100 |
| Approximate weight of machine without oil | kg | 1500 |
| Approx. machine measurements(LxAnxAl) | mm | 2800 x 1100 x 1552 |
expanded technical document