- Injects up to 63 g.
- Clamping force 500 kN
- Standard model
| | 500H125 | 500H190 | G.
I
N
J
E
C
T
I
O
N
G. | Spindle type | - | H | A“std” | B | C | H | A“std” | B | | Nominal spindle diameter | mm | 24 | 26 | 28 | 30 | 25 | 30 | 34 | | Injection pressure according to spindles | bar | 2722 | 2319 | 2000 | 1742 | 2692 | 2022 | 1574 | | Injection theoretical volume mat.PS | cm3 | 45 | 53 | 61 | 70 | 69 | 91 | 118 | | Injection theoretical weight, mat. PS | g | 40 | 47 | 54 | 63 | 62 | 81 | 106 | | Injection speed | cm3/s | 54 | 67 | 78 | 89 | 58 | 77 | 99 | | Plasticization capacity, material PS | g/s | 5,55 | 6,11 | 6,94 | 7,77 | 6,11 | 10,55 | 12,77 | | Spindle length-diameter ratio | L/D | - | 20,4 | - | - | - | 20,7 | - | | Number of spindle turns | rpm | 335 | 270 | | Number of resistances (nozzle+plasticization) | - | 1 + 3 | 1 + 3 | | Total heating power | kW | 5,04 | 5,04 | C
L
A
M
P
I
N
G
G
R
O
U
P
| Maximum clamping force | kN | 500 | | Maximum opening between plates | mm | 560 | | Maximum mold opening | mm | 260 | | Mold thickness (minimum/maximum) | mm | 100 / 300 | | Space between bars (Horizontal) | mm | 310 | | Plate measurements (Width x Height) | mm | 460 x 460 | | Nº of ejector points | - | 5 | | Ejector force | kN | 27,4 | | Ejector course | mm | 60 | | Hydraulic pump power | kW (HP) | 11 (15) | | Oil tank volume | lts | 130 | | Approximate weight of machine without oil | kg | 2900 | | Approx. machine measurements(LxAnxAl) | mm | 3660 x 1000 x 1510 |
|
expanded technical document