- Injects up to 211 g.
- Clamping force 1200 kN
- Standard model
| | 1200H250 | 1200H360 | 1200H550 | G.
I
N
Y
E
C
C
I
Ó
N | Spindle type | - | H | A“std” | B | H | A“std” | B | H | A“std” | B | | Nominal spindle diameter | mm | 30 | 34 | 38 | 34 | 38 | 42 | 38 | 42 | 48 | | Injection pressure according to spindles | bar | 2333 | 1816 | 1454 | 2325 | 1861 | 1523 | 2421 | 1806 | 1517 | | Volumen teórico de la inyección, mat. PS | cm3 | 106 | 136 | 170 | 154 | 192 | 235 | 226 | 277 | 362 | | Injection theoretical weight, mat. PS | g | 95 | 122 | 153 | 138 | 172 | 211 | 203 | 249 | 325 | | Injection speed | cm3/s | 65 | 84 | 104 | 90 | 113 | 138 | 106 | 129 | 169 | | Plasticization capacity, material PS | g/s | 10,55 | 12,77 | 16,11 | 13,88 | 16,84 | 22,22 | 19,44 | 21,66 | 27,7 | | Spindle length-diameter ratio | L/D | - | 20,3 | - | - | 20 | - | - | 20,7 | - | | Number of spindle turns | rpm | 220 | 300 | 275 | | Number of resistances (nozzle+plasticization) | - | 1 + 3 | 1 + 3 | 1 + 3 | | Total heating power | kW | 6,7 | 7,2 | 7,96 | G
R
U
P
O
D
E
C
I
E
R
R
E | Maximum clamping force | kN | 1200 | | Maximum opening between plates | mm | 860 | | Maximum mold opening | mm | 410 | | Mold thickness (minimum/maximum) | mm | 150 / 450 | | Space between bars (Horizontal) | mm | 410 | | Plate measurements (Width x Height) | mm | 640 x 640 | | Nº of ejector points | - | 5 | | Ejector force | kN | 39,5 | | Ejector course | mm | 130 | | Hydraulic pump power | kW (HP) | 15 (20) | | Oil tank volume | lts | 250 | | Approximate weight of machine without oil | kg | 5500 | | Approx. machine measurements(LxAnxAl) | mm | 4800 x 1260 x 1720 |
|
expanded technical document