- Injects up to 325 g.
- Clamping force 1600 kN
- Standard model | | 1600H360 | 1600H550 | 1600H715 | G.
I
N
J
E
C
T
I
O
N
G. | Spindle type | - | H | A“std” | B | H | A“std” | B | H | A“std” | B | | Nominal spindle diameter | mm | 34 | 38 | 42 | 38 | 42 | 48 | 42 | 48 | 52 | | Injection pressure according to spindles | bar | 2325 | 1861 | 1523 | 2421 | 1806 | 1517 | 2332 | 1786 | 1522 | | Volumen teórico de la inyección, mat. PS | cm3 | 154 | 192 | 235 | 226 | 277 | 362 | 304 | 398 | 467 | | Injection theoretical weight, mat. PS | g | 138 | 138 | 211 | 203 | 249 | 325 | 273 | 358 | 420 | | Injection speed | cm3/s | 90 | 113 | 138 | 106 | 129 | 169 | 130 | 170 | 200 | | Plasticization capacity, material PS | g/s | 13,88 | 16,84 | 22,22 | 19,44 | 21,66 | 27,77 | 23,33 | 27,77 | 33,3 | | Spindle length-diameter ratio | L/D | - | 20 | - | - | 20,7 | - | - | 19,6 | - | | Number of spindle turns | rpm | 300 | 275 | 220 | | Number of resistances (nozzle+plasticization) | - | 1 + 3 | 1 + 3 | 1 + 3 | | Total heating power | kW | 7,2 | 7,96 | 8,8 | C
L
A
M
P
I
N
G
G
R
O
U
P
| Maximum clamping force | kN | 1600 | | Maximum opening between plates | mm | 920 | | Maximum mold opening | mm | 420 | | Mold thickness (minimum/maximum) | mm | 150 / 500 | | Space between bars (Horizontal) | mm | 450 | | Plate measurements (Width x Height) | mm | 690 x 690 | | Nº of ejector points | - | 5 | | Ejector force | kN | 39,5 | | Ejector course | mm | 130 | | Hydraulic pump power | kW (HP) | 18,5 (25) | | Oil tank volume | lts | 350 | | Approximate weight of machine without oil | kg | 6500 | | Approx. machine measurements(LxAnxAl) | mm | 4800 x 1300 x 1760 |
|
expanded technical document