- Injects up to 555 g.
- Clamping force 2400 kN
- Standard model
| | 2400H715 | 2400H1010 | 2400H1280 | G.
I
N
J
E
C
T
I
O
N
G. | Spindle type | - | H | A“std” | B | H | A“std” | B | H | A“std” | B | | Nominal spindle diameter | mm | 42 | 48 | 52 | 48 | 52 | 55 | 52 | 55 | 60 | | Injection pressure according to spindles | bar | 2332 | 1786 | 1522 | 2138 | 1822 | 1629 | 2143 | 1915 | 1610 | | Volumen teórico de la inyección, mat. PS | cm3 | 304 | 398 | 467 | 470 | 552 | 617 | 594 | 665 | 792 | | Injection theoretical weight, mat. PS | g | 273 | 358 | 420 | 423 | 496 | 555 | 534 | 598 | 712 | | Injection speed | cm3/s | 130 | 170 | 200 | 190 | 223 | 250 | 191 | 214 | 254 | | Plasticization capacity, material PS | g/s | 23,33 | 27,77 | 33,33 | 30,55 | 36,11 | 41,66 | 36,11 | 41,66 | 47,2 | | Spindle length-diameter ratio | L/D | - | 19,6 | - | - | 19,6 | - | - | 19,6 | - | | Number of spindle turns | rpm | 220 | 220 | 175 | | Number of resistances (nozzle+plasticization) | - | 1 + 3 | 1 + 3 | 1 + 3 | | Total heating power | kW | 8,8 | 11,2 | 12,4 | C
L
A
M
P
I
N
G
G
R
O
U
P
| Maximum clamping force | kN | 2400 | | Maximum opening between plates | mm | 1160 | | Maximum mold opening | mm | 530 | | Mold thickness (minimum/maximum) | mm | 200 / 630 | | Space between bars (Horizontal) | mm | 530 | | Plate measurements (Width x Height) | mm | 800 x 800 | | Nº of ejector points | - | 9 | | Ejector force | kN | 53,8 | | Ejector course | mm | 160 | | Hydraulic pump power | kW (HP) | 30 (40) | | Oil tank volume | lts | 450 | | Approximate weight of machine without oil | kg | 9000 | | Approx. machine measurements(LxAnxAl) | mm | 5900 x 1420 x 1860 |
|
expanded technical document