- Injects up to 153 g.
- Clamping force 900 kN
- Standard model
| | 900H190 | 900H250 | 900H360 | G.
I
N
J
E
C
T
I
O
N
G. | Spindle type | - | H | A“std” | B | H | A“std” | B | H | A“std” | B | | Nominal spindle diameter | mm | 26 | 30 | 34 | 30 | 34 | 38 | 34 | 38 | 42 | | Injection pressure according to spindles | bar | 2692 | 2022 | 1574 | 2333 | 1816 | 1454 | 2325 | 1861 | 1523 | | Volumen teórico de la inyección, mat. PS | cm3 | 69 | 91 | 118 | 106 | 136 | 170 | 154 | 192 | 235 | | Injection theoretical weight, mat. PS | g | 62 | 81 | 106 | 95 | 122 | 153 | 138 | 172 | 211 | | Injection speed | cm3/s | 58 | 77 | 99 | 65 | 84 | 104 | 90 | 113 | 138 | | Plasticization capacity, material PS | g/s | 6,11 | 10,55 | 12,77 | 10,55 | 12,77 | 16,11 | 13,88 | 16,84 | 22,22 | | Spindle length-diameter ratio | L/D | - | 20,7 | - | - | 20,3 | - | - | 20 | - | | Number of spindle turns | rpm | 270 | 220 | 300 | | Number of resistances (nozzle+plasticization) | - | 1 + 3 | 1 + 3 | 1 + 3 | | Total heating power | kW | 5,04 | 6,7 | 7,2 | C
L
A
M
P
I
N
G
G
R
O
U
P
| Maximum clamping force | kN | 900 | | Maximum opening between plates | mm | 680 | | Maximum mold opening | mm | 330 | | Mold thickness (minimum/maximum) | mm | 150 / 350 | | Space between bars (Horizontal) | mm | 360 | | Plate measurements (Width x Height) | mm | 560 x 560 | | Nº of ejector points | - | 5 | | Ejector force | kN | 39,5 | | Ejector course | mm | 80 | | Hydraulic pump power | kW (HP) | 11 (15) | | Oil tank volume | lts | 200 | | Approximate weight of machine without oil | kg | 4300 | | Approx. machine measurements(LxAnxAl) | mm | 4200 x 1180 x 1600 |
|
expanded technical document